Product recommendation
Flat steel Heald wires, heddle are used to lead the warp yarns to move in lifting motion, forming a weaving shed for weft yarns to be brought in.
Our offered heald wire is well-manufactured by using of superior quality stainless steel. The edges of our steel heddles are well polished and available with thread eye for impeccable weaving of fine and low twist wrap yarn. Moreover, our range of heald wires is suitable for all types of mechanical and electrical wrap stop motions.
Also, we check these products upon various parameters so as to avoid any trouble from customer side. Different specifications weaving healds are available to meet the clients' specific needs.
Specification of closed type flat steel healds wire , heddle wire
Type | Cross Section | Length | |
Kind | Shape | Width*Thickness(mm) | Distance between end loops |
Closed type | Simplex (S) | 2.20*0.30 |
280 330 300 380 302 420
|
2.34*0.35 | |||
Douplex(D) | 2.50*0.35 | ||
2.60*0.40 | |||
Unilateral Douplex (P) | 2.80*0.40 | ||
2.50*0.30 | |||
Schematic diagram of mail-eye for closed flat steel healds
Closed type flat steel healds
Specification of open type flat steel healds
Type | Cross Section | Length | |
Kind | Shape | Width*Thickness(mm) | Distance between end loops |
Oopentype | Simplex (J) Douplex(JP) Simplex (C) Douplex (CP) | 5.50*0.23 |
280 382 302 407 331 432 356
|
5.50*0.25 | |||
5.50*0.30 | |||
5.50*0.38 | |||
5.50*0.40 | |||
Type ofthread eye | Type of end loop | ||||
Position of the thread eye | Code | Size | Code | Upper loop | Lower loop |
U above center C in the center | 2 | 5.5*1.2 |
-5 -6 -7
| ||
4 | 6.5*1.8 | ||||
5 | 8.0*2.5 | ||||
6 | 8.0*3.8 | ||||
Schematic diagram of mail-eye for open flat steel healds
Open type flat steel healds
Please visit product page for more information
-
![Weaving Machine Spare Parts 170 double hole spacing 12 Heddle Rapier Loom Parts]()
Weaving Machine Spare Parts 170 double hole spacing 12 Heddle Rapier Loom Parts
Each piece of ribbon heald has undergone rigorous testing, and all of them meet the use standards of textile machinery. There are four commonly used models of ribbon healds, 180 * 44 * 0.3; 170*4.7*0.3； 150*5*0.3； 150*4*0.3. If the machines in the factory have special requirements for webbing healds, customization can also be supported, but customization requires 500,000 pieces order quantity. Our company has its own production factory, and all raw materials and factory accessories have undergone strict screening and testing. The productivity of the factory is guaranteed, and the monthly output is basically maintained at about 500,000 pieces. If the customer has urgent requirements, the factory can also increase the output according to the requirements. 170 double hole spacing 12 Heddle Rapier Loom Parts
More
-
- A Revolutionary Engine for Denim Production
- Revolutionizing Textile Technology: The Leno Device Becomes Key to Enhancing Fabric Quality and Production Efficiency
- 2026 International Textile Machinery Exhibition: Upgraded Exhibits & Technologies
- Automatic Drawing-in Machine Empowers Grey Fabric Production
