Heald Warehouse Maintenance

For the automatic drawing-in machine, start by maintaining the heald warehouse. Use alcohol and a rag to clean the slide rails, effectively removing slurry and dirt that can affect the heald’s functionality.

Heald Upper and Lower Rail Maintenance

In the automatic drawing-in machine, the upper and lower rails of the heald should be cleaned regularly. Utilize a plastic hanging brush to scrape off any accumulated slurry and dirt. After cleaning, apply a proper amount of lubricating anti-rust agent evenly to protect the heald rails.

Heald Separation Device Maintenance

When maintaining the heald separation device in your automatic drawing-in machine, remove the heald separation knife. Clean it and other parts at the installation position with a suitable detergent. Additionally, spray a proper amount of GL261 on the guide groove of the heald separation knife to ensure smooth operation.

Heald Mushroom Head (O Type) Maintenance

For the heald mushroom head in the automatic drawing-in machine, pull the rack back and forth, turn the mushroom head, and remove any wool debris inside. Clean it with detergent, and then apply a proper amount of lubricating oil to maintain its efficiency.

Heald Roller (O Type) Maintenance

During the maintenance of the heald roller in your automatic drawing-in machine, brush off any dirt on the roller and heald clamp teeth. Remove any entangled yarn and scrape out sticking debris to ensure the heald roller operates smoothly.

Hanging Needle Maintenance

Check the elasticity of the hanging needle in the automatic drawing-in machine and inspect whether the hook is worn, bent, or deformed. Clean any foreign matter and dirt on the hanging needle to maintain its functionality.

Heald Belt Maintenance

Finally, check the tension of the heald belt in your automatic drawing-in machine to ensure smooth sliding. Inspect the belt guide rails for any foreign matter, dirt, and wool. Regular maintenance of the heald belt is essential for the efficient operation of the equipment.

Additional Maintenance Tips

Steel Cable Inspection: Ensure that the steel cable and the cable holes in the automatic drawing-in machine are undamaged. Replace any damaged cables immediately for safety’s sake!

Cover Cleaning: Wipe the cover and machine surface clean with clean wiping paper to keep the appearance neat and tidy!

Frames with Fabric: Remove dirt and tangled threads from the fabric frames of the automatic drawing-in machine to ensure smooth operation!

Wheel Maintenance: Use scissors to trim any threads on the caster wheels to ensure smooth movement!

Mechanical Movement Components: Regularly lubricate all transmission components in the automatic drawing-in machine to extend their lifespan!

Electrical Circuit Check: Ensure that the sensors, reducers, emergency stop switches, etc., in the automatic drawing-in machine are in good condition to ensure safe operation!

Conclusion

Performing regular maintenance on all components of your automatic drawing-in machine is vital for its efficient operation. By following this guide, you can ensure that your machine remains in optimal condition.